Technical data
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- Reverse polarity protection
- Yes
- Short-circuit proof
- Yes (27 VDC or ground)
- Consumption typ.
- 20 mA (24 VDC, w/o load)
- 35 mA (24 VDC, w/o load, redundant)
- Initializing time typ.
- ≤ 170 ms after power on
- ≤ 1 s after power on (redundant)
- Interface
- CANopen®
- Function
- Linear position feedback
- Profile conformity
- CANopen® CiA communication profile DS 301, LSS profile DSP 305, device profile DS 406
- Measuring range
- Up to 4.7 m
- Resolution
- 0.1 mm/step
- Linearity typ.
- ±0.2 % FS (measuring length 2.3 m)
- ±0.4 % FS (measuring length 4.7 m)
- Absolute accuracy typ.
- ±0.3 % FS (+25 °C / measuring length 2.3 m)
- ±0.6 % FS (+25 °C / measuring length 4.7 m)
- Sensing method
- Magnetic
- Code
- Programmable
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Programmable parameters
- Operating modes
- Rotating direction
- Scaling
- Zero position
Technical data - mechanical design
- Protection EN 60529
- IP 67 (housing, drainage holes closed)
- IP 54 (cable inlet)
- Material
- Cable: stainless steel cable AISI 316 coated with nylon PA12
- Housing: plastic and alumimium
- Operating temperature
- -40...+85 °C
- Measuring length
- 2.3 m
- 4.7 m
- Cable acceleration
- ≤50 m/s²
- Cable diameter
- 0.7 mm
- Cable fastening
- Eyelet
- Height: 5 mm
- Internal diameter: 8 mm
- Outer diameter: 15 mm
- Pull-in force
- >1.5 N (pull-in force reduced at low temperatures)
- Pull-out force
- ≤8 N
- Relative humidity
- 95 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration 20 g, 58-2000 Hz
- EN 60068-2-27
- Shock 50 g, 11 ms
- Weight approx.
- 625 g
- Connection
- Flange connector M12, 5-pin
- Cable 2 m, radial
- Instruction
- Please consider the assembly instructions
Software
Software
-
GCA3, GCA5 describing files
Downloads
Data sheet
-
Data sheet – GCA3-PT - CANopen® up to 4.7 m
-
Data sheet – GCA3-PT - CANopen® up to 4.7 m
-
Data sheet – GCA3-PT - CANopen® up to 4.7 m
Quickstart
-
GCA3-PT
Software Manual
-
GCA - CANopen®
Declaration of conformity
-
DoC / CoC - GCA3, GCA5, GCA8, GCA12
CAD
-
GCA3-PT with cable / STEP
-
GCA3-PT with flange M12 / STEP
-
GCA3-PT with flange M12 / PARASOLIDS
-
GCA3-PT with flange M12 / IGES
-
GCA3-PT with cable / PARASOLIDS
-
GCA3-PT with cable / IGES